Skip Navigation (Press Enter)

1978 Chevrolet Malibu Clear Body

for Losi 22S No Prep Drag Car, Slash 2wd Drag Car & AE DR10

This is a 1978 Chevrolet® Malibu™ Drag Car Clear Body. Pro-Line is proud to introduce the timeless 1978 Chevy® Malibu™ body specifically designed for the growing No-Prep SC Drag Racing scene! Bowtie fans will love this ultra-scale body that captures all the signature details of Mark Micke's 4,700hp, twin-turbo, 200mph+ G-body Malibu™.

Transform your Losi® 22S™ No Prep Drag Car, Slash® 2wd or AE DR10 into a scale 1/4-mile beast in retro-classic square-body style! We recommend using our Hoosier 2.2" Drag Racing Tires on the front, Hoosier Drag Slick SC 2.2"/3.0" Drag Racing Tires or Reaction HP SC 2.2"/3.0" Belted Tires in the rear, Pomona Drag Spec Wheels, and the Stinger Wheelie Bar to complete the ultimate hot-rod look.

To create the most scale look possible, the body is designed with a narrower track width than a traditional SC body. It is a direct fit on the Losi® 22S™ No Prep Drag Car & AE DR10, but your 2wd Slash® will require some modifications to fit correctly.

Here is the list of modifications needed to fit the Malibu™ on your Slash® 2wd.

Check out this video for a step-by-step build:

  • Pro-Line Extended Body Mounts for Slash® 2wd
  • Traxxas® Bandit® Front Arms — #2531X
  • Traxxas® Bandit® Rear Arms — #2750R
  • Traxxas® Bandit® Front Caster Blocks — #2432
  • Traxxas® Bandit® Steering Blocks — #3636
  • Traxxas® Bandit® Axles — #2437
  • Traxxas® King Pins — #3740
  • Traxxas® Front Camber Turnbuckles — #2444
  • Traxxas® Rear Turnbuckles — #2443
  • Traxxas® Toe Link Turnbuckles — #2445
  • Shorten Rear Drive Shafts
  • Remove Front Bumper

Pro-Line's team of innovators are also offering some exclusive 3D BONUS Parts, available for download, free of charge! Click the links below to grab 3D files to print-at-home on your 3D printer or send to an online print shop such as Shapeways:

  • Bullhorn Exhaust Pipe .STL
    • Ream a 14.5mm diameter hole in your body and insert it from the inside. Attach using Shoo-goo on the flange.
  • Rear Body Post Reposition Bracket .STL
    • Use these brackets between your Slash 2wd rear shock tower and PL Extended Body Mounts to move the rear posts 50mm rearwards. This will locate the Secure-Loc Caps on the flat trunk surface rather than in the rear windshield. This is not required but provides a better and cleaner looking fit.

Don't forget to submit your finished Pro-Line body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Give your SC drag car the most scale look at the strip with Pro-Line's 1978 Chevy® Malibu™!

*This body requires extended body mounts for proper body fit on your Slash® 2wd*
http://www.prolineracing.com/extended-body-mounts-sc/

*Bullhorn exhaust pipes are not included.


General Motors trademarks used under license to Pro-Line.
Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.
Click Here for painting tips

Slash® is a registered trademark of Traxxas® L.P
©2020 Pro-Line Racing.Losi® and 22S™ are trademarks or registered trademarks of Horizon Hobby®, LLC. All other trademarks, service marks and logos are property of their respective owners.

Search:
3549-00 | 1978 Chevrolet® Malibu™ Clear Body for Losi® 22S™ No Prep Drag Car, Slash® 2wd Drag Car & AE DR10

  • Fully Licensed 1978 Chevy® Malibu™
  • Perfect for No-Prep Drag Racing
  • Incredible Scale Replica of Mark Micke’s 1:1 Malibu™ Drag car
  • Optional add-on Rear Spoiler with Hardware Included
  • Made from Durable Polycarbonate
  • Paint-then-peel Overspray Film Included
  • Four steps to Drag Race Ready:
    1.) Clean Body and apply included window mask
    2.) Paint then peel the over-spray film off
    3.) Sticker your body (decal sheet included)
    4.) Mount your new body onto your SC
  • Made in the USA, since 1982 — Read about Pro-Line Racing's History

  • 1978 Chevy® Malibu™ Clear Body and Spoiler (1 pc)
  • Rear Spoiler Hardware
  • Detailed Decal Sheet
  • Window Masks

Length:   25.5" (647mm)
Width Front:   11.4" (289mm)
Width Rear:   11.6" (295mm)
Height:   6.1" (156mm)
Wheelbase:   13.0" (330mm)
     
     

Recently Viewed

Product Ratings and Reviews

Add a Review

0 out of 5 stars